Guaranteed comfort, room by room.
For a single room or several areas within a home, the selection must take into account the intended use and the available installation. AIRQIA helps you find a clear, efficient and easy-to-control setup.
An approach tailored to the context.
Choosing between a single-split and a multi-split system depends on the number of rooms to be air-conditioned, the route of the pipework and the flexibility you need in your day-to-day life.

One zone or several?
A single-unit system can cater for a specific space. Where there are rooms with different timings or temperature requirements, a multi-split system can provide zone-by-zone control and a more centralised outdoor unit.
- Number and size of rooms
- Piping routes and outdoor locations
- Independent zone-by-zone control
Comfort is something you can hear, too
As well as cooling capacity, it is important to consider noise levels, the position of the indoor unit and air distribution. The installation affects the day-to-day experience just as much as the equipment itself.
- Unit positioning
- Acoustic conditions
- Access for cleaning and maintenance
The responsible choice
We compare heating, cooling, energy consumption and maintenance requirements before recommending a configuration. Actual performance depends on the equipment and installation conditions.
- Actual conditions of use
- Operational efficiency
- Support for installers
Carry on exploring.
RAC multi-split systems: how to choose the right configuration
Choosing between a single split and a RAC multi-split system comes down to one question: how many rooms do you need to condition, and how independently? RAC, short for room air conditioning, covers everything from the simple single split, with one indoor and one outdoor unit, to multi-split configurations that connect several indoor units to a single outdoor unit.
A single split is simple and direct: each room has its own outdoor unit, which gives complete autonomy. A multi-split concentrates the outdoor equipment, which helps when the facade has little space or there are aesthetic restrictions, but it means thinking about how capacity is shared between rooms and how long the pipework runs are. Neither option is better in the abstract: it depends on the building and how it is used.
RAC multi-split: common mistakes to avoid
A common mistake is to choose the capacity from the floor area alone, ignoring solar exposure, ceiling height and occupancy. Another is to forget the pipework route and the condensate drain. In homes with several zones and different schedules, it is worth comparing with the air conditioning page before deciding, to see when an individual system stops being the best answer.
- Indoor units placed so that air does not blow directly onto seating or sleeping areas
- Condensate drainage and access to the outdoor unit planned from the design stage
- Noise from indoor and outdoor units, especially in bedrooms
- A plan for filter cleaning and periodic servicing
Refrigerants and responsible installation
Air-conditioning equipment uses refrigerant gases covered by European rules, so installation and servicing should be carried out by qualified professionals. The European Commission explains the framework for fluorinated greenhouse gases. If you are weighing up a RAC multi-split for your project, also look at VRF for commercial buildings or ask for help through the AIRQIA contact page.
Shall we design the next solution together?
Tell us about the background, the objectives and the deadline. The AIRQIA team will help you determine the most appropriate technical approach.
